Jiaozuo Shijia energy-saving heat exchange equipment Co. Ltd

High quality product, professional service, being the core supplier in laser industry!

GJ-66B Metal Finned Tube Machine

GJ-66B Metal Finned Tube Machine

GJ—66B metal finned tube machine is suitable for various single and double metal finned tubes made of rolled steel, steel aluminum, pure aluminum, copper aluminum and copper.

Send Inquiry
Product Details

GJ-66B Metal Finned Tube Machine

Operation Manual

Operating Instruction for Metal Finned Tube Machine

 

Ⅰ. Characteristics

GJ66B metal finned tube machine is suitable for various single and double metal finned tubes made of rolled steel, steel aluminum, pure aluminum, copper aluminum and copper.

 

Ⅱ.  Transportation

When the packing case containing rolling mill is lifted, the bottom beam will be major press point, packing case can't place on object with edge or placed upside down or laterally.

When the unpacked rolling mill is lifted by crane, wire rope must cross shaft hole of reducer and upper tool holder position, and plate must be padded at contact position of wire rope and rolling mill, or wire rope is sleeved by rubber tube when lifting starts.

 

III. Installation

In general condition, fixation isn't required for the finned tube machine of rolling finned tube with outer diameter within Φ44.When the finned tube over Φ44 is rolled, in order to prevent displacement of back and front guidance due to movement of rolling mill, and increase resistance to the tube, rolling machine must be installed on the leveling and solid ground, and foundation bolt must be solid and vibration-proof (as Figure below).

 

 

IⅤ. Composition of finned tube machine

Rolling mill is primarily composed of frame, power section, reduction box, tool holder component and electrical system.

Frame is composed of base, table, liquid-collecting frame and protective hood.

Power section primarily includes main motor (38011KW) and cooling pump 120W.

Reduction box primarily includes belt pulley (two are optional), reduction box and gear, the reduction box uses N220-N320 (ambient temperature is 30 to 40) or N320-N460 (ambient temperature is 40 to 65) lubricating oil, the oil injection position is indicated at the center point of oil leveler, and oil shall be replaced after 2500h of use.

Tool holder component is composed of tool holder body, tool holder, cutter shaft and blade, and it's the key part for manual regulation which will be primarily described.

Refer to electrical schematic diagram of finned tube machine for electrical system composition.

 


Hot Tags: gj-66b metal finned tube machine, China, manufacturers, customized, price
Related Products
Inquiry